Scanning Sequence Examples; Errors While Scanning; User Preferences/Miscellaneous Option Parameter Defaults - Motorola DS6878 Reference Manual

5 - 2 DS6878 Product Reference Guide

Scanning Sequence Examples

In most cases scanning one bar code sets the parameter value. For example, to set the beeper tone to high,
scan the High Frequency (beeper tone) bar code listed under
issues a fast warble beep and the LED turns green, signifying a successful parameter entry.
Other parameters require scanning several bar codes. See these parameter descriptions for this procedure.

Errors While Scanning

Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.

User Preferences/Miscellaneous Option Parameter Defaults

Table • lists the defaults for preferences parameters. To change the default values:
•
Scan the appropriate bar codes in this guide. These new values replace the standard default values in
memory. To recall the default parameter values, scan the
•
Configure the digital scanner using the 123Scan
NOTE See
miscellaneous default parameters.
User Preferences Parameter Defaults
Table 5-1
User Preferences
Set Default Parameter
Parameter Bar Code Scanning
Beep After Good Decode
Suppress Power Up Beeps
Beeper Tone
Beeper Volume
Beeper Duration
Beep on Insertion
Decode Pager Motor
Decode Pager Motor Duration
Night Mode Trigger
Night Mode Toggle
Batch Mode
Appendix A, Standard Default Parameters
Parameter
Beeper Tone on page
Default Parameters on page
2
configuration program (see
for all user preferences, hosts, symbologies, and
Parameter
Number
Set Defaults
236 Enable
56 Enable
721 Do Not Suppress
145 Medium
140 High
628 Medium
288 Enable
613 Disable
626 150 msec
1215 Disable
N/A N/A
544 Normal (Do Not Batch
Data)
5-8. The digital scanner
5-5.
123Scan2 on page
Page
Default
Number
5-5
5-6
5-6
5-7
5-8
5-9
5-10
5-10
5-11
5-11
5-14
5-14
5-15
13-1).