Supplying Power To The Cr0078-P Cradle; Lost Connection To Host; Mounting The Cradle - Motorola DS6878 Reference Manual

1 - 10 DS6878 Product Reference Guide
If necessary (for non-autodetected interfaces), scan the appropriate host bar code
6.
CR0078-S/CR0008-S Cradle Quick Reference Guide
Power Port
Host Port
Connecting the Cables to the CR0078-P Cradle
Figure 1-8

Supplying Power to the CR0078-P Cradle

The CR0078-P cradle receives power from an external power supply.
NOTE The CR0078-S cradle has the ability to be powered by the USB port instead of an external power supply.
The CR0078-P can only receive power via an external power supply.

Lost Connection to Host

If scanned data does not transmit to the cradle's host, ensure that all cables are firmly inserted and the power
supply is connected to an appropriate AC outlet. If scanned data still does not transmit to the host, reestablish
a connection with the host:
Disconnect the power supply from the cradle.
1.
Disconnect the host interface cable from the cradle.
2.
Wait three seconds.
3.
Reconnect the host interface cable to the cradle.
4.
Reconnect the power supply to the cradle, if required.
5.
Reestablish pairing with the cradle by scanning the pairing bar code.
6.
NOTE The CR0078-S does not always require a power supply whereas, the CR0008-S and CR0078-P always
require a power supply.

Mounting the Cradle

For information on mounting the CR0078-S cradle, refer to the CR0078-S/CR0008-S Cradle Quick Reference
Guide.
Power
Alternate Host Groove
Alternate Power Groove
Host Port
for more information).
Connect to appropriate host
Power Port
(refer to the