User-Programmable Supplementals; Upc/Ean/Jan Supplemental Redundancy - Motorola DS6878 Reference Manual

User-Programmable Supplementals

Supplemental 1: Parameter # 579
Supplemental 2: Parameter # 580
If you selected a Supplemental User-Programmable option from
page 15-10, select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits
using the numeric bar codes beginning on
second 3-digit prefix. Then select the 3 digits using the numeric bar codes beginning on

UPC/EAN/JAN Supplemental Redundancy

Parameter # 80
If you selected Autodiscriminate UPC/EAN/JAN Supplementals, this option adjusts the number of times to
decode a symbol without supplementals before transmission. The range is from two to thirty times. Five or
above is recommended when decoding a mix of UPC/EAN/JAN symbols with and without supplementals. The
default is 10.
Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes in
Numeric Bar Codes. Enter a leading zero for single digit numbers. To correct an error or change a selection,
scan Cancel on page
UPC/EAN/JAN Supplemental Redundancy
page D-1.
User-Programmable Supplemental 1
User-Programmable Supplemental 2
D-3.
Decode UPC/EAN/JAN Supplementals on
Select User-Programmable Supplemental 2 to set a
Symbologies 15 - 13
page D-1.
Appendix D,