Code 11 - Motorola DS6878 Reference Manual

Code 11

Code 11
Parameter # 10
To enable or disable Code 11, scan the appropriate bar code below.
Enable Code 11
Set Lengths for Code 11
Parameter # L1 = 28, L2 = 29
The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within
a specific range.
•
One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length.
Select the length using the numeric bar codes in
decode only Code 11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1
followed by 4. To correct an error or to change the selection, scan
•
Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two
selected lengths. Select lengths using the numeric bar codes in
example, to decode only Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two
Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to change the selection,
scan Cancel on page
•
Length Within Range - Select this option to decode a Code 11 symbol with a specific length
range. Select lengths using numeric bar codes in
decode Code 11 symbols containing between 4 and 12 characters, first scan Code 11 - Length Within
Range. Then scan 0, 4, 1, and 2 (enter a leading zero for single digit numbers). To correct an error or
change the selection, scan
•
Any Length - Scan this option to decode Code 11 symbols containing any number of characters within
the digital scanner's capability.
(1)
D-3.
Cancel on page
*
Disable Code 11
Appendix D, Numeric Bar
Cancel on page D-3.
Appendix D, Numeric Bar
Appendix D, Numeric Bar Codes.
D-3.
Symbologies 15 - 37
(0)
Codes. For example, to
Codes. For
For example, to