Low Power Mode; Time Delay To Hand-Held Low Power Mode - Motorola DS6878 Reference Manual

5 - 20 DS6878 Product Reference Guide

Low Power Mode

Parameter # 128
If enabled, the digital scanner enters a low power consumption mode after Sleep Mode has expired, in which
the LEDs turn off in order to conserve energy and prolong the life of the scanner. The digital scanner wakes
when it is lifted, senses a trigger pull, or when the host attempts to communicate.
If disabled, power remains on after each decode attempt.
Disable Low Power Mode

Time Delay to Hand-Held Low Power Mode

Parameter # 146
This parameter sets the time it takes the digital scanner to enter reduced power mode after any scanning
activity. Scan the appropriate bar code below to set the time.
*
100 msec
(0)
(65)
*
Enable Low Power Mode
(1)
500 msec
(69)