Wand Emulation Host Parameters; Wand Emulation Host Types; Leading Margin (Quiet Zone) - Motorola DS6878 Reference Manual

11 - 4 DS6878 Product Reference Guide

Wand Emulation Host Parameters

Wand Emulation Host Types

Select a Wand Emulation host by scanning one of the bar codes below.
Symbol OmniLink Interface Controller
Symbol PTC Terminal (Telxon)
1
User selection is required to configure this interface and this is the most common selection.

Leading Margin (Quiet Zone)

Scan a bar code below to select a leading margin duration. A leading margin is the time that precedes the first
bar of the scan, (in milliseconds). The minimum allowed value is 80 msec and the maximum is 250 msec. This
parameter accommodates older wand decoders which cannot handle short leading margins.
NOTE 250 msec is the maximum value that this parameter can attain, however, 200 msec is sufficient.
*
200 msec
1
80 msec
Symbol PDT Terminal (MSI)
140 msec