Headphones - Minelab EXPLORER II User Manual

THE MINELAB EXPLORER II
www.minelab.com

HEADPHONES

Figure 2.14 Inserting headphone
26
H E A D P H O N E S
Attaching headphones
Figure 2.14
The use of headphones when treasure hunting with the Explorer II
will avoid disturbing others in the area. The reduced power
Headphone demands of the headphones will also extend the battery life.
Socket
The socket for the headphone plug is located in the top right of the
rubber seal at the top of the handle assembly. The headphones may
be plugged into this socket or unplugged at any stage of operation.
P0595-A
Congratulations! Your Explorer II is now assembled. You are
now ready to proceed to Chapter 3: Batteries.
Should you wish to remove the search coil, instructions
follow on the next two pages.
!