Bluetooth® Headphones - Minelab GPX 6000 User Manual

Bluetooth® Headphones
Bluetooth® headphones with aptX Low Latency™ compatibility such as the Minelab
ML 100 wireless headphones are best used with GPX 6000™ for best performance�
Standard Bluetooth® headphones are also compatible�
Minelab ML 100 headphones use aptX™ Low Latency technology, which delivers faster, higher quality audio than standard
Bluetooth®, so it will give more precise and faster detection responses�
Optional Wired Operation
The ML 100 headphones are supplied with a
detachable auxiliary cable for wired operation�
To use the cable, plug the connector into the
headphone jack and turn 90° anti‑clockwise to lock
the connector� This prevents the connector from
being accidentally disconnected�
CONTENTS
1. Volume Plus button (+)
1
2. Multi‑function button
2
3. Volume Minus button (−)
4. Status LED
3
Pairing mode (alternating blue and red)
4
Connected (flash every 3 sec)
On, not connected (flash every 2 sec)
5
Charging
Charging complete (Off)
6
5. USB Micro‑B charging socket
6. Headphone socket 3.5 mm (1/8 inch)
7