Clerk Interrupt Function - Casio QT-6000 - VERSION 3.0 User Manual

Touch screen smart terminal
Hide thumbs Also See for QT-6000 - VERSION 3.0:
Table of Contents

Advertisement

Advanced Operations

Clerk interrupt function

There are two types of clerk interrupt function, illustrated by Procedure 1 and Procedure 2 below.
• In Procedure 1, each clerk possesses a unique clerk interrupt buffer, and so the clerk interrupt function gives
each individual clerk the ability to perform an independent registration operation. In this case, each clerk is
individually linked to a unique clerk interrupt buffer.
• In Procedure 2, multiple clerks use the same clerk interrupt buffer, and so a single clerk interrupt operation
(clerk change during registration) can perform any registration that is in progress. In this case, multiple clerks
are linked to a single clerk interrupt buffer.
In this procedure, "Allow clerk to open check No. belonging to another clerk" program is necessary.
Note the following important points concerning the clerk interrupt function.
• The terminal must be programmed to allow use of the clerk interrupt function.
• In the REG, REF, and REG– modes, clerks can be change while a transaction is in progress, making it
possible for multiple clerks to simultaneously perform registrations using a single terminal.
For example, if clerk 1 is interrupted while registering a transaction, clerk 2 can use the same machine to
register a different transaction. Then clerk 1 can continue the original registration from the point where it was
interrupted.
Procedure 1
Sign on
Clerk 1
Clerk 2
Procedure 2
Sign on
Clerk 1
Clerk 2
NOTES
• A cancel operation can be performed during registration by either of the clerks. When clerk 1 signs back on
(after being interrupt by clerk 2), the cancel operation cancels only the items registered after signing back on
(only this receipt) or from the top of the transaction. This is selectable by the key program.
• A <NB> key must be programmed in order to use clerk interrupt.
46
E
<NEW BALANCE>*
Registration A
Sign on
<NEW BALANCE>*
Registration A
Sign on
Sign on
<CASH>
Finalization A
<NEW BALANCE>*
Registration B
Sign on
<CASH>
Finalization A + B
<NEW BALANCE>*
Registration B
Sign on
<RECEIPT>
Post receipt A
Sign on
<CASH>
Finalization B
* Omissible
* Omissible

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qt-6100

Table of Contents