Clock-In Operation - Casio QT-6000 Reference Manual

2-10-2-2. Clock-in operation (2)

Program type:
Allow to specify job code = YES, Display job code window = NO
(Refer to the page 54 of the programming manual.)
Operation
REG 10-10-01 11:59 AM 001234
GLENN DEAL
Clock-in OK?
2-10-2-3. Clock-in operation (3)
Program type:
Display job code window = YES
Allow to clock-in with non-preset job-code = NO
(Refer to the page 54 of the programming manual.)
Operation
REG 10-10-01 11:59 AM 001234
CLOCK-IN
1.Cashier
2.Cook
3.Dish Washer
4.Cleaning
QT-6000 Reference Manual
1. XXXXXX . YY <CLOCK-IN>
When this message appears, press the <YES> key to register
the start of working hours.
11:59 AM
Enter the employee No. (within 6 digits), "."(decimal point),
and the job code (2 digits).
0.00
Employee No. Job code
1. XXXXXX <CLOCK-IN>
2. Choose the appropriate Job Code from the CLOCK-IN menu,
and press the <YES> key to register the start of working
hours.
→ Job codes that are programmed in Employee file are displayed.
0.00
XXXXXX
Employee No.
XXXXXX . YY
R-61