Clerk Control Function; Clerk Interrupt - Casio QT-6000 Reference Manual

2-6. Clerk control function

2-6-1. Clerk interrupt

Clerk 1 Clerk 2
Registration
Registration
Finalization
Guest
receipt issuance
Notes
QT-6000 Reference Manual
The terminal can be programmed to allow the clerk interrupt function, which makes it
possible for multiple clerk to simultaneously use the same register. If a clerk starts
registration of a transaction, another can be interrupt the original registration and begin a
new one. The original clerk can later resume the interrupted original registration. You can
use the clerk interrupt function with the check tracking function.
Clerk 3
Registration
Registration
Registration
Finalization
Registration
Finalization
Guest
receipt issuance
Guest
receipt issuance
1) Error correct operation
The error correct operation cannot be performed for registrations made before a clerk
change. The error correct operation should be performed before clerk change.
2) Guest receipt
A guest receipt can be issued following clerk change, and receipts can be issued
separately for each clerk.
3) Cancel operation
The cancel operation can affect the entire transaction (multiple receipts: complete
cancellation) or only the same transaction (one receipt) by programming the <CAN-
CEL> key.
Sign on clerk 2 (clerk 1 registration put on hold)
Sign on clerk 3 (clerk 2 registration put on hold)
Sign on clerk 1.
Displays subtotal amount without add-on tax for clerk 1.
Sign on clerk 2.
Displays subtotal amount without add-on tax for clerk 2.
Sign on clerk 3.
Displays subtotal amount without add-on tax for clerk 3.
Sign on clerk 1
Sign on clerk 2
Sign on clerk 3
R-47