Manager Operation; Machine Initialization; Init; Flag Clear - Casio QT-6000 Reference Manual

Manager Operation

3.

Manager operation

3-1. Machine initialization

* See the "INIT code" section to notice the detail information of the last four digits.

3-1-1. INIT

Start

3-1-2. Flag clear

Start
R-82
This section describes manager operations (such as machine initialization, IPL, manager
functions etc.) of QT-6000.
There are three different types of initialization such as INIT, FC, and INIT2.
INIT; Machine initialization, all program and total data are reset.
FC; Flag clear, all program and total data are remained, only the current transaction data
are reset.
INIT2; Machine initialization 2, all program data are remained, only total data are reset.
The procedures of machine initialization are described in the chapter 1 of the programming
manual. The required passwords are listed below.
Operation Password
00020000
00010000
00040000

Init

00050000
00060000
00080000

Flag clear

No need

Init2

8888888888
Initialization process is as follows:
Input password
(see above)
File creation 1
Revise terminal
connection table
Flag clear process is as follows:
Hardware reset
Initialize work area/
buffers/flags
Digit meaning
for the U.S.
for other area (default descriptors are initialized in English)
for other area (default descriptors are initialized in German)
for other area (default descriptors are initialized in French)
for other area (default descriptors are initialized in Spanish)
Arabic (default descriptors are initialized in English)
Hardware reset
All RAM reset
Initialization operation
Input date/time, ID etc.
Receiving program
from other terminal or
CF card
Menu selection
FC/Init2
Inline ID definition
File creation 2
Initialization result
to E-journal
Initialization result
to E-journal
Init 2
End
End