Solution To Abnormality Of Master Terminal; Solution To Abnormality Of Satellite Terminal; Sign On Compulsory - Casio QT-6000 Reference Manual

Application System

2-11-2. Solution to abnormality of master terminal

REG 10-10-01 11:59 AM 001234
Harrison
CLOCK-IN
JOB
E177 Time&Attendance Data
Communication Error.
Please Call Manager.
Receipt image
REG C01
Communication Error

2-11-3. Solution to abnormality of satellite terminal

2-11-4. Sign on compulsory

Note:
R-66
When the satellite terminals cannot receive any information from the master terminal, the
master terminal shows the error message on the window and prints out the receipt with
terminal IDs that failed to communicate the data.
11:59 AM
Dish Washier
0.00
Please sign on.
MC #01
12-31-2005 11:59 AM 001234
MC#01
MC#03
• The error message and receipt will appear whenever the sign-on is failed. If you cannot
solve the inline data communication problem, program the system connection again,
and remove the uncommunicative terminal.
• When the satellite terminal cannot receive any information from the master terminal,
the default CLOCK-IN/OUT information remain.
In this case, only manager can sign on.
• When the satellite terminal could receive the CLOCK-IN/OUT information from the
master terminal only once, but failed to receive after then, the CLOCK-IN/OUT
information in each satellite terminal has left in the last received condition. In such case,
the last received information control employees' sign on/off. (Manager can always sign
on.)
When the satellite terminal cannot receive the information in spite of normal CLOCK-IN
operation on the master terminal, an employee may not sign on for some reason.
In such case, the manager needs the following operation.
1. Sign on by the manager (normal sign on operation.)
2. 99 xxxx <CLK#> (xxxx: the secret code of the corresponding employee, 4-digit.)
3. Sign off by the manager and the corresponding employee can sign on.
When the error message appeared under the employee's CLOCK-IN operation, manager
should operate above steps.
— Header
— Fixed message
XXXX
— Machine ID, Error code
XXXX
— Machine ID, Error code