Order Id Change - Casio QT-6000 Reference Manual

3-3-8. Order ID change

MGR C01 10-10-01 12:34
Manager Mode
1.System Connection Check
2.Remote On
3.Remote Off
4.Busy Reset
5.Stock Maintenance
6.Drawer for Clerk
7.CHK#(CLK Interrupt)
8.Order ID Change
Order ID Change
Definition Enable
1.Order1
2.Order2
3.Order3
4.Order4
5.Order5
6.Order6
7.Order7
OK?
Note: D D D
3 2 1
QT-6000 Reference Manual
This command is used to change the target printer of order temporarily.
000000
↓
0.00
YES
103
202
203
104
000
000
000
YES
0.00
D D D
3 2 1
In case of D = 1, D & D
3 2
In case of D = 2, D & D
3 2
1. Sign on a clerk (if necessary).
2. Press <Manager> to assign manager mode.
3. Select "8. Order ID Change" and press the <YES> key.
4. Select "YES" of the Definition Enable field, and enter an
appropriate ID number of each order printer and press the
<YES> key. Select "YES" of the last line to execute this
command.
defines the terminal physical ID that connect to printer-1.
1
defines the terminal physical ID that connect to printer-2.
1
R-91