Kemppi FastMig KM300 Operating Manual page 7

• Protect the machine from sand and dust during use and in storage.
• The recommended operating temperature range is -20 to +40 °C. The machine's operation
efficiency decreases and it becomes more prone to damage if used in temperatures in
excess of 40 °C.
• Place the machine so that it is not exposed to hot surfaces, sparks or spatter.
• Make sure the airflow to and from the machine is unrestricted.
• EMC classification of this product is class A in accordance with electromagnetic
compatibility standards CISPR 11 and IEC 60974-10, and therefore the product is designed
to be used in industrial environment only. Such class-A equipment is not intended for use
in residential locations where the electrical power is provided by the public low-voltage
supply system. The machine may interfere with sensitive home electronic devices.
WARNING: This class A equipment is not intended for use in residential locations where
the electrical power is provided by a public low-voltage supply system. In those locations
it may be difficult to ensure the electromagnetic compatibility due to conducted and
radiated disturbances.
• Arc welding equipment always c ause electromagnetic disturbance. To minimize the
harmful effects of this, use the equipment strictly according to the operating manual and
other recommendations.
gas cylinders and pneumatic devices
• Adhere to the instructions for handling pneumatic devices and gas cylinders.
• Make sure that gas cylinders are used and stored in properly ventilated spaces. A leaking
gas cylincer may replace the oxygen in the inhaled air, causing suffocation.
• Before use, make sure that the gas cylinder contains gas suitable for the intended
purpose.
• Always fix the gas cylinder securely in an upright position, against a cylinder wall rack or
purpose-made cylinder cart.
• Never move a gas cylinder when the flow adjuster is in place. Put the valve cover in place
during transportation.
• Close the gas cylinder valve after use.
Disclaimer
While every effort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specification of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
FI
SV
NO
DA
EN EN
DE
NL
FR
ES
PL
RU
5