Setting up
9
Distance of the hot-air nozzle to the feed rollers
.02.03
● Loosen wing nut 1.
● Turn milled nut 2 until the front edge of the hot-air nozzle is about 12 mm in front of the
● Tighten wing nut 1.
● Turn screw 3 to position the front edge of the hot-air nozzle parallel to the feed roller
9 - 6
12 mm
Fig. 9 - 06
Switch the machine off and let it cool down!
Danger of burns if the hot-air nozzle is touched!
feed roller axes.
axes.
2
2
3
1
3