Setting up
9
Adjusting the hot-air nozzle (only for machines with hot-air nozzle)
.02
9
Lateral and angle positioning of the hot-air nozzle
.02.01
Lateral positioning
● Loosen screw 1.
● Move the entire swivel unit 2 to position the engaged hot-air nozzle 3 so that it is
● Tighten screw 1.
Angle positioning
● Loosen nut 5.
● Turn screw 6 to position the front edge of the hot-air nozzle 3, viewed from above,
● Tighten nut 5.
● Recheck the lateral position.
9 - 4
5
3
Fig. 9 - 04
centered with the feed rollers 4.
parallel to the axes of the feed rollers 4.
6
1
4
2