Pfaff 8309-023 Instruction Manual page 29

9 Height adjustment of the hot-air nozzle
.02.02
Fig. 9 - 05
● Loosen screw 1.
● Re-position the entire suspension unit, until the hot-air nozzle 2 is level with the gap
between the feed rollers.
● Tighten screw 1.
1
2
Do not put your hand near the hot-air nozzle!
Danger of burns if the hot-air nozzle is touched!
As the position of the hot-air nozzle can change during heating up, the
adjustment should be carried out when the machine is at operating
temperature.
Setting up
2
9 - 5