•
Steering Cable Grease Fitting (If Equipped) - Rotate steering wheel
to fully retract the steering cable end into the outboard tilt tube.
Lubricate through fitting.
a -
Fitting
2. Lubricate the following with Light Weight Oil
•
Steering Link Rod Pivot Points - Lubricate pivot points.
3. Lubricate the following with Quicksilver or Mercury Precision Lubricants
Anti-Corrosion Grease or 2-4-C with Teflon.
•
Propeller Shaft - Refer to Propeller Replacement for removal and
installation of the propeller. Coat the entire propeller shaft with
lubricant to prevent the propeller hub from corroding to the shaft.
MAINTENANCE
a
79
b -
Steering cable end
ob00585
b
3045
3046