•
Tilt lock pins - Apply lubricant to pins. Pin is spring loaded. Make
sure this pin is free to push in and out.
a -
Spring loaded tilt lock pin
•
Lubricate along the entire tilt pin tracks.
•
Lubricate the throttle and shaft cables, move components and pivot
points.
The end of the steering cable must be fully retracted into the outboard tilt
tube before adding lubricant. Adding lubricant to steering cable when fully
extended could cause steering cable to become hydraulically locked. A
hydraulically locked steering cable will cause loss of steering control,
possibly resulting in serious injury or death.
MAINTENANCE
a
WARNING
!
78
b
3042
b -
Tilt lock pin
3043
3044