6. Side handle gear shift and remote control models - Set the gear shift
to neutral position.
IMPORTANT: Outboards with battery charging capabilities must not be
operated with battery cables disconnected from the battery. Damage to the
charging system may result.
7. Turn primer/idle speed knob, if equipped, a full clockwise to increase
engine idle speed.
8. Starting a cold engine.
a. Sea Pro/Marathon Models - Pull out choke.
b. Non Sea Pro/Marathon Models - Pull out and push in the primer/
idle speed knob one to three times to prime the engine. Leave the
knob in the pulled out position when starting.
OPERATION
N
R
ob00351
54
N
F
3022
ob01396
4063
ob01384