Table of Contents
Advertisement
3. Place a block of wood between gearcase and propeller to hold propeller
and remove propeller nut.
4. Pull propeller straight off shaft. If propeller is seized to the shaft and
cannot be removed, have the propeller removed by an authorized
dealer.
5. Coat the propeller shaft with Quicksilver or Mercury Precision
Lubricants Anti-Corrosion Grease or 2-4-C with Teflon.
IMPORTANT: To prevent the propeller hub from corroding and seizing to
the propeller shaft (especially in salt water), always apply a coat of the
recommended lubricant to the entire propeller shaft at the recommended
maintenance intervals, and also each time the propeller is removed.
MAINTENANCE
73
ob00578
ob00579
ob00580
Hide quick links:
Advertisement
Table of Contents
