EPA Emissions
EMISSION CERTIFICATION LABEL
An emission certification label, showing emission levels and engine
specifications directly related to emissions, is placed on the engine at time
of manufacture.
a
This engine conforms to
b
IDLE SPEED :
c
TIMING (IN DEGREES):
Standard spark plug:
Suppressor spark plug:
d
e
Valve Clearance (Cold) mm
a -
Idle speed
b -
Engine horsepower
c -
Timing specification
d -
Recommended spark plug
and gap
e -
Valve clearance (if
applicable)
OWNER RESPONSIBILITY
The owner/operator is required to have routine engine maintenance
performed to maintain emission levels within prescribed certification
standards.
The owner/operator is not to modify the engine in any manner that would
alter the horsepower or allow emissions levels to exceed their
predetermined factory specifications.
Inspection And Maintenance Schedule
BEFORE EACH USE
•
Check that lanyard stop switch stops the engine.
•
Visually inspect the fuel system for deterioration or leaks.
•
Check outboard for tightness on transom.
•
Check steering system for binding or loose components.
MAINTENANCE
model year EPA regulations for Marine SI engines.
Refer to Owner's Manual for required maintenance.
hp
cc
GAP :
Intake
Exhaust
EMISSION CONTROL
INFORMATION
FAMILY:
FEL:
f -
Family number
g -
Maximum emission output for
the engine family
h -
Piston placement
i -
Date of manufacture
65
f
g
g/kW h
h
i
ob01071