Selling Point Descriptions - Hitachi C-10FCB Technical Data And Service Manualice Manual

4-1. Selling Point Descriptions

(1) Press cutting
Maker
Model
Max. cutting
dimension
Height x Width
(H x W)
Press cutting with the head swiveling enables cutting square workpieces as large as shown in Table 1 in a single
sawing operation. (See Fig. 1.)
(2) Miter cutting facility
Maker
Model
Max. cutting
dimension
Right 60˚
Height x Width
(H x W)
Right and left 45˚
Height x Width
(H x W)
By turning the table to the right or left as desired, the Model C 10FCB is capable of miter cutting of up to 45˚ to the
left, or 60˚ to the right. The miter angle setting mechanism enables easy cutting-angle setting.
(3) Left bevel cutting facility
Maker
Model
Max. cutting
dimension
Left bevel 45˚
Height x Width
(H x W)
By inclining the saw blade section (head) on its swivel mounting,
bevel cutting of up to a maximum of 45˚ to the left can be obtained.
(When the machine is shipped from the factory, the swivel stoppers
of the head are precisely adjusted for 0˚ and 45˚ [for further details,
please refer to Paragraph 9-1, Bevel Angle Adjustment].)
Table 1
(Unit: mm)
HITACHI
C 10FCB
59 x 144 (2-5/16" x 5-21/32")
89 x 101 (3-1/2" x 3-31/32")
Table 2
(Unit: mm)
HITACHI
C 10FCB
59 x 72
(2-5/16" x 2-13/16")
59 x 102
(2-5/16" x 4")
Table 3
(Unit: mm)
HITACHI
C 10FCB
41 x 144 (1-5/8" x 5-21/32")
Workpiece
Workpiece
45˚ right and
left (60˚ right)
--- 2 ---
Width (W)
Height (H)
Fig. 1
Width (W)
Height (H)
Fig. 2
Width (W)
(Left)
45˚
Height (H)
Bevel cutting
Fig. 3