Selling Point Descriptions - Hitachi C 7SB2/C Technical Data And Service Manual

4-1. Selling Point Descriptions

(1) Lightweight, 10.1 lbs. (4.6 kg)
The motor is enlarged to increase the input and output power. The gear cover, blade cover and lower guard
are made of magnesium diecasting alloy to minimize increase of the product weight. The table below shows a
weight comparison with C (catalog weight 10.1 lbs., measured weight 10.6 lbs.).
Maker
Model
Catalog weight
Measured weight
(2) AC/DC switch (110 V and 120 V only)
The same AC/DC switch as the one used in the conventional Models C 7SB and C 7BD is adopted to
correspond to the customer demand. The Models C 7SB2 and C 7BD2 are operable on a DC power supply
such as a generator on a building site.
(3) 24-tooth carbide tipped saw blade (for USA)
The Models C 7SB2 for USA and C 7BD2 are equipped with the 24-tooth carbide tipped saw blade that is the
current mainstream of standard saw blade. Green urethane painting is applied on the surface to distinguish
the Hitachi saw blade from others at a glance.
(4) Soft and comfortable grip
The non-slip, soft and comfortable grip is adopted to improve the operability.
(5) High-power input motor: 1710 W (GBR (110 V): 1670 W)
The Models C 7SB2 and C 7BD2 are equipped with the high-power motor to increase the cutting ability.
(6) Easy access bevel adjustment with lever
The conventional wing bolt type bevel adjustment system is changed to the lever type for convenient bevel
adjustment.
(7) 55˚ bevel capacity (for USA, AUS and NZL)
The bevel angle between the saw blade and the base is adjustable from 0˚ to 55˚ for wider application range
(conventional Models C 7SB and C 7BD: 0˚ to 45˚). For ease of operation, the adjustment section is divided
into two ranges; one is adjustable from 0˚ to 45˚ for comparatively frequent use and the other is adjustable
from 45˚ to 55˚ for less frequent use.
(8) Heavy-duty aluminum base with scale
The Models C 7SB2 and C 7BD2 are equipped with the heavy-duty aluminum die-cast base that is the same
as the Models C 7SB and C 7BD. In addition, this base has scales at the front and the side for ease of
operation.
(9) Easy access cutting depth adjustment
The position of the cutting depth adjustment lever is shifted from the gear cover side to the outside of the
handle for easier cutting depth adjustment.
Hitachi
C 7SB2
C 7BD2
lbs. (kg)
10.1 (4.6)
lbs. (kg)
10.6 (4.8)
Hitachi
C 7SB
C 7BD
10.6 (4.8)
10.6 (4.8)
--- 2 ---
C
5007NH 5007NBA
10.1 (4.6)
11.0 (5.0)
10.6 (4.8)
11.0 (5.0)
Weight excludes cord.