Installing And Operating The Tongue - Burley d’LITE Owner's Instruction Manual

Installing and Operating the Tongue

d'Lite , Encore
™
Tip the trailer onto its rear end. Slide the tongue through the LEFT front
tongue receptacle. Depress the safety button to allow it to slide back through
the rear tongue receptacle. Line up the rear hole on the tongue with the
hole in the rear tongue receptacle. Insert the pin through both holes. Once
inserted, rotate the pin's spring clip to engage the pin underneath the tongue
receptacle. Always check to ensure the tongue is properly installed before
using your trailer.
Never operate the trailer without the tongue retaining pin locked in
place. An unlocked tongue can loosen or detach, and cause accident
resulting in serious injury.
Cub
™
Slide the tongue through the two plastic tongue receptacles on the LEFT side
of the trailer until the end of the tongue is fl ush with the back edge of the
rear tongue receptacle.
Secure the tongue as follows:
1. Slide the retaining
pin in the rearward
receptacle through
the hole provided
in the tongue.
2. Secure it and lock
the pin by rotating it
toward the rear of the
trailer as shown.
3. Slip the retaining pin
though the forward hole
in the tongue and lock
in place. Refer to the
illustration showing the
locked position. Firmly
pull on the tongue to
ensure that it is secure.
10
B U R L E Y T R A I L E R O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L
, Solo , Lady Bug
™ ™
WARNING
Trailer Pin
Stroller Pin
™
Front Tongue
Mount
Hole
Hole
Forward hole in tongue
Pin
Rear Tongue
Mount
Button
2
1
3