Attaching Wheels; Using Parking Brake (Honey Bee); Installing And Operating Tow Bar - Burley Bee Owner's Instruction And Safety Manual

Attaching Wheels

Insert wheel axle assembly completely into trailer axle. Tighten
quick release lever, with lever in "CLOSED" position and aimed
at trailer rear. Verify that tires are inflated to pressure marked on
tire side wall. Figures 5 and 6
Figure 5
Quick-release lever
in unlocked
"Open" position
WARNING
MAKE SURE WHEELS ARE HELD SECURELY, WITH WHEEL SHAFT FULLY INSERTED INTO
HOLLOW AXLE. YOU SHOULD NOT BE ABLE TO ROCK OR SHIFT WHEELS. IMPROPERLY
INSTALLED WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR SERIOUS INJURY.
 |
B U R L E Y C H I L D T R A I L E R O W N E R ' S I N S T R U C T I O N A N D S A F E T Y M A N U A L
Figure 6
Quick-release
lever in locked
"Closed" position

Using Parking Brake (Honey Bee)

Engage parking brake by pushing handle to the right. Photo 1

Installing and Operating Tow Bar

1. Slide tow bar through both receptacles on the LEFT side.
2. Line up BACK tow bar hole with rear receptacle hole.
3. Insert retaining pin through rear holes, and lock hoop
securely. Figure 7
4. Honey Bee: Engage parking brake and tighten knob to
secure stroller wheel in "Bike" position.
Using
WARNING
NEVER OPERATE TRAILER WITHOUT RETAINING PIN LOCKED IN PLACE. AN UNLOCKED
TOW BAR CAN LOOSEN OR DETACH, CAUSING ACCIDENT RESULTING IN SERIOUS INJURY.
Photo 1