Schedule; I/O Setting - Planet ICA-5250 User Manual

Network Dis-connected
Network IP check

3.8.2 Schedule

Schedule
Snapshot
Interval

3.8.3 I/O Setting

The ICA-5250 supports 1 input/1 output. When input is triggered, it can send the video to some
specific mail addresses, transmit the video to remote ftp server, and trigger the relay and SAMBA.
To avoid video loss, the camera will start to save the video to
local SD card when it detects no network connection. The
video recording will continuously be saved into SD card and
divided into every 10 minutes a file until the network is
reconnected successfully. The oldest file will be deleted if the
capacity of SD card is full.
Key in the target IP address and interval. The camera checks
once in a while according to the setting interval time if it can link
to the target IP address. If connection fails, the camera starts to
save the video to SD card
After complete the schedule setup, the camera data will be
recorded according to the schedule setup.
After enable the snapshot function, user can select the storage
position of snapshot file, the interval time of snapshot and the
reserved file name of snapshot.
The interval between two snapshots.
56
Full HD Ultra-mini Vandal Dome
ICA-5250