Test Mode - Wildgame W6EF User Manual

Power On
1.
To turn the unit ON press and
release the power button.
Ready
Clock
Date
Photos
Image
PIR
Resolution
Active
Delay
2.
Check the battery level icon to
ensure the batteries just installed
contain the proper charge level. If
so, you are ok to proceed with
camera use.
Ready
Clock
Date
Photos
Image
Still
PIR
Hi
Resolution
Hi
Active
24Hr
Delay
15s
NOTE: LCD cycle through camera
information. PIR picture number >
Flextime number > Remaining pictures
> Time
page 5
0432
PM
Still Video
Hi Med Lo
Hi Med Lo
24Hr Day Night
15s 30s 1m 2m
0432
PM
Video
Med Lo
Med Lo
Day Night
30s 1m
1.
PIR LED Status Light: When the
LED status light illuminate Red
this indicates that the PIR sensor
has sensed a qualified event.
2.
Image Capture Status Light: The
LED status light illuminates
Green when the camera has
taken an image and is writing it
to the SD card.
2m
3.
LCD Ready Mode: The camera
will automatically enter the
Ready Mode if a button is not
depressed for greater than 30
seconds.

Test Mode