Scanning Lamp - Canon GP160F Service Manual

CHAPTER 3 EXPOSURE SYSTEM
A.

Scanning lamp

1) Remove the ADF or pressure plate
(Refer to P.3-1 of the ADF service
manual).
2) Remove the 2 installation screws,
and then remove the copyboard
glass stay.
3) Remove the copyboard glass.
4) Remove 2 of each of the installation
screws, then remove the upper rear
cover [1] and the upper front cover
[2].
5) Slowly move the Mirror 1 mount
assembly from the home position
about 10cm to the right.
6) Remove the installation screw [3],
and then remove the inverter PCB
cover [4]
3-6
Download Free Service Manual at http://printer1.blogspot.com
COPYRIGHT © 1999 CANON INC.
[2]
Figure 3-301
[3]
[4]
Figure 3-302
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]