Canon GP160F Service Manual page 215

No. Work details
4 Following the
paper trailing edge position
plate, remove it by pushing it
down. Push down gently to
avoid damaging the paper trail-
ing edge position plate.
5 Re-install the paper trailing edge
position plate to fit the desired
paper size, by reversing the
process outlined above.
6 Adjust the position of the paper
size sensor lever to fit the
desired paper size.
COPYRIGHT © 1999 CANON INC.
Download Free Service Manual at http://printer1.blogspot.com
mark on the
Paper trailing edge position plate
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Illustration/ remarks
Paper trailing edge
position plate
(Push down gently)
Paper size sensor lever
CHAPTER 11 INSTALLATION
Paper lifting plate
11-9