2.
To remove the Feeding / Separation
rollers
It is possible to attach and remove
the feeding / separation rollers even if the
printer unit is not removed from the main
unit.
1) Pull out and remove the main unit's
cassette.
2) Slightly widen the lower right cover's
front/rear suppor t assembly and
remove the lower right cover.
:
Caution
Do not overly widen the suppor t
assembly.
3) Unclip the roller collar tabs [2] and
remove the feed roller [3] and separa-
tion roller [4]. The feed roller is
removed from the cassette insertion
opening and the separation roller is
removed from the lower right side.
COPYRIGHT © 1999 CANON INC.
Download Free Service Manual at http://printer1.blogspot.com
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP/FEEDING SYSTEM
[1]
Figure 7-703
[2]
[4]
[2]
Figure 7-704
[3]
7-25