Canon GP160F Service Manual page 418

All in one printer
Hide thumbs Also See for GP160F:
Table of Contents

Advertisement

CHAPTER 13 TROUBLESHOOTING
##0753 [TX] Limit for the number of protocol signal re-transmissions is exceeded or T5 time
limit (60 seconds) is exceeded after PPS-NULL output
Cause
• The other party's machine's page buffer is
full, or RNR was received after output of
PPS-NULL because the machine was in
use, and after RR output a significant signal
could not be properly received.
##0754 [TX] Limit for number of protocol signal re-transmissions is exceeded after PPS-NULL
output
Cause
• The line condition is poor. After PPS-NULL
output, PPR was received 4 times and CTC
was output, but the other party's machine
can not receive properly.
• The line condition is poor. After PPS-NULL
output, PPR was received 4 times and CTC
was output, but a significant signal can not
be properly received.
##0755 [TX] A significant signal can not be detected and the limit for number of protocol sig-
nal re-transmissions is exceeded after PPS-MPS output
Cause
• The line condition is poor and PPS-MPS is
not transmitted properly.
• The line condition is poor and the signal
can not be received properly.
13-184
Download Free Service Manual at http://printer1.blogspot.com
COPYRIGHT © 1999 CANON INC.
Countermeasure
(1) Set ECM Tx to "OFF" in the user mode
data entry's Tx settings function settings
(2) Lower the Tx speed setting in the user
mode.
Countermeasure
• Raise the modem output level in #2 MENU
parameter 007, so the other party's
machine can properly receive CTC.
• Have the other party raise the output level
so the signal can be received properly.
Countermeasure
(1) Raise the modem output level in #2 MENU
parameter 007, so the other party's
machine can properly receive PPS-MPS.
(2) Adjust the NL equalizer in #2 MENU para-
meter 005, so the other party's machine
can properly receive PPS-MPS.
(3) Add an echo protect tone to the V29
modem signal in #1 SSSW-SW03 Bit 1.
• Have the other party's machine's output
level raised so the signal can be received
properly.
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gp160dfGp160

Table of Contents