Canon GP160F Service Manual page 128

CHAPTER 7 PICK-UP/FEEDING SYSTEM
3. Registration sensor stationary jam (for cassette pick-up)
A registration sensor (PS302) stationary jam is only detected when continuous multi-
ple sheet pick-up takes place.
At the time of the following sheet pick-up, the jam detection starts within approx. 3.0
seconds after the pick-up sensor (PS303) has turned ON (the following sheet leading
edge is in a position of approx. 10mm in front of the vertical path roller).
If approx. 2.5 seconds has passed, but the trailing edge of the preceding sheet has
not left the registration sensor (PS302), the registration sensor judges a delay jam has
occurred.
Start
signal
Pick-up solenoid
(SL301)
Pick-up sensor
(PS303)
Registration sensor
jam check
Registration sensor
(PS302)
Main motor
(M601)
7-18
Download Free Service Manual at http://printer1.blogspot.com
Second sheet
First sheet
Figure 7-608
COPYRIGHT © 1999 CANON INC.
Third sheet
0.3 sec.
2.5 sec.
Normal
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
0.3 sec.
2.5 sec.
Abnormal