Canon GP160F Service Manual page 329

#1 SSSW-SW26: Transmission function settings
SW Bit
No. No.
0 Forced direct transmission function
1 Reserved
2 Reserved
3 Reserved
26 4 Reserved
5 Reserved
Destination at the time broadcast transmission is
6
interrupted
7 Error report for time of transmission interruption Do not output
[Bit 0]
Selects whether or not to set the forced direct transmission function.
Set: All transmissions other than broadcast transmissions are sent directly.
[Bit 6]
Selects whether or not to interrupt communications to all destinations when broadcast
transmission is interrupted.
[Bit 7]
Selects whether or not to output an error report when the stop key is pressed to inter-
rupt transmission.
COPYRIGHT © 1999 CANON INC.
Download Free Service Manual at http://printer1.blogspot.com
Function
Table 13-517
CANON GP160 REV.0 FEB. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Bit setting
1
Set Do not set
One destination All destinations
Output
0
13-95