Maintenance manual for technical assistance - LB 2800 - LB 2810
4. HANDLING AND STORAGE
4.1. Handling
During handling and transport, the machine must
remain in a vertical position according to the directions
on the packaging. Carry out lifting and positioning with
care. Do not shake the machine.
Ensure that nobody is in the vicinity when lifting
and handling of the load and, in difficult condi-
tions, appropriate personnel should check the
operations.
4.2. Storage
The machine should be stored according to the follo-
wing conditions:
- minimum temperature: above 4°C;
- maximum temperature: below 40°C;
- maximum humidity: below 95%.
The machine is packaged in cardboard and wood.
Given the total weight of the package, it is prohibi-
ted to stack more than three machines. The machi-
ne should be stored, in its original packaging, in a
dry and clean place (without humidity or dust).
Manual code 10066574 / Rel. 0.00 / March 2009
5. ACCESSORIES INCLUDED
• Instruction booklet for machine use.
• Accessories
A) Rifle-type brush
B) Brush with bristles
C) Detergent for cappuccinatore
D) Puly caf
Attention
E) Silicone pipe
F) Pipe cavoflex
G) Flexible pipe
H) Reducer
B
Warning
6. DISMANTLING
Disposal of machine components after dismantling,
should be carried out with respect for the environ-
ment, avoiding pollution of the soil, water and air.
Any operation should comply with local legislation
in force.
C
D
A
H
G
F
E
Environment
13