Table of Contents
Advertisement
When the pressure is at zero, completely empty the
boiler, by opening the specific valve located on the
lower part of it. If the above procedure is not correctly
carried out, the opening of any part of the hydraulic cir-
cuit can cause a sudden outlet of overheat water under
pressure.
- Be careful with the tips of the capsule perforator loca-
ted inside the clamping ring of the brewing unit.
- This machine is an appliance for espresso coffee di-
spensing. any other type of use is considered incor-
rect and therefore dangerous.
Attention
Non-observance of the above rules can cause se-
rious harm to people, property or animals.
3. HANDLING AND STORAGE
3.1. Handling
during handling the machine must be treated according
to the rules in force concerning health and safety on wor-
king places.
during handling and transport, the machine must remain
in a vertical position according to the directions and sym-
bols on the packaging. carry out lifting and positioning
with care. do not shake the machine. For occasional
transport use the original packaging, which will contain
and protect the machine.
3.2. Storage
The machine should be stored according to the following
conditions:
- minimum temperature: above 5°c;
- maximum temperature: below 40°c;
- maximum humidity: below 95%.
The machine is packaged in cardboard and polystyrene.
check the maximum number of containers that can be
stacked on the packaging.
8
Maintenance manual for technical assistance
4. DISMANTLING AND DISPOSAL
4.1. Instruction for end of life treatment
This product conforms to art. 13 of the decree law no.
151 of July 25th, 2005, "Implementation of directives
2002/95/ec, 2002/96/ce and 2003/108/ce, regarding
the restriction of the use of certain hazardous substan-
ces in electrical and electronic equipment and disposal
of waste electrical and electronic equipment".
The crossed-out wheeled bin symbol displayed
on the appliance and/or the packaging indicates
that at the end of its life, the product should not
be treated as a generic household waste but should be
delivered to an authorised local recycling centre of
Weee. collecting the components of the machine in
properly separated fractions will enable recycling, treat-
ment and environmentally friendly disposal and contri-
bute to avoiding possible adverse effects on the
environment and on health and favours the re-use
and/or re-cycling of materials which make up the ma-
chine.
Environment
INFORMATION FOR USERS OF PROFESSIONAL AP-
PLIANCES. The separate collection of this ap-
pliance, at the end of its life, is organised and
managed by the producer. The user who wants to di-
spose of this appliance must contact the producer
and follow the system to collect the appliance sepa-
rately at the end of its useful life.
Environment
INFORMATION FOR USERS OF HOUSEHOLD AP-
PLIANCES. At the end of the useful life of the ap-
pliance, the user must send it to a WEEE waste
collection centre or to the retailer when purchasing
a new similar appliance, on a one-to one basis. In
both cases make the machine unusable cutting the
power cord.
an appropriate separate collection of the appliance for
re-cycling and disposal compatible with the environment
contributes to preventing any possible negative effects
on the environment and health and favours the re-use
and/or recycling of materials which make up the ma-
chine.
unlawful disposal of this product involves the applica-
tion of administrative sanctions in compliance with legi-
slative
decree
no.
modifications.
Manual code 10066846 / Rel. 0.00 / March 2012
152/2006
and
subsequent
Hide quick links:
Advertisement
Table of Contents
