Table of Contents
Advertisement
3
C H A P T E R
Powering On and Configuring the
Server
This chapter tells you how to power on and configure the server to suit your
application. It contains the sections:
"Understanding the Status Indicators" on page 11
■
"Powering On the Server" on page 11
■
"Configuring the Server" on page 13
■
"Accessing the Sun Advanced Lights Out Manager Software" on page 16
■
Understanding the Status Indicators
Before you power on the server, you should become familiar with the LED
indicators associated with the server itself and with various components. The server
status indicators are located on the bezel and repeated on the back panel. For more
information about the status indicators, refer to the Sun Fire V125 Server
Administration Guide.
Powering On the Server
To power on the server, you can use either the On/Standby button, located behind
the front bezel, or you can use the keyboard. Powering on from the keyboard enables
you to see system output as the server powers on.
11
Advertisement
Table of Contents
