Page 2
Congratulations! You have bought a great, innovative product from Audio. Dap Audio MA45CD brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated show, this product provides the effect you need. You can rely on Audio, for more excellent audio products.
Dap Audio Dap Audio MA45CD Product Guide ™ Warning.................…...……………..…………………………….………..…. Safety-instructions………………………………………………………………………………………………………… Operating Determinations.…………………………………………………………………………………………….. Description................…...………………………………………….………..… Features and Overview ………………………………...….……………….………….……………………….……… Backside…….……………………………………………………………………………………….………………..…. Installation................…...……………………………………..……….………. Set Up and Operation..............……..…………………………….……………….. Operations CD Player ……..........……………………………....……………..… Set Up Example 1+2……..........……………………………....………………..…. Connection Cables..............................Maintenance………......…........………..………….…….………….…....Troubleshooting………......…........………..………….…….………….…..... Product Specifications..............……………….…….………………….....
WARNING CAUTION! Keep this device away from rain and moisture! FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! SAFETY INSTRUCTIONS Every person involved with the installation, operation and maintenance of this device has to: be qualified follow the instructions of this manual CAUTION! Be careful with your operations.
Prevent distortion! Make sure that all components connected to the MA45CD have sufficient power ratings. Otherwise distortion will be generated because the components are operated at their limits.
Description of the device Features MA45CD is an amplifier from DAP Audio. • 2 unbalanced 6.3 mm jack inputs mic sensivity • 1 unbalanced 6.3 mm jack input Mic/Aux • Final stages completely protected thermal shut down and short protection.
20%. Input Connection Microphones The MA45CD is equipped with 3 inputs. They can be used with unbalanced low impedance devices MIC-1, MIC-2 These two microphone inputs are unbalanced type and are provided with a double pole phone jack.
Balanced LO Z Microphone May also be connected to the unbalanced input We advise you to use FL0215, FL023 or FL026 unbalanced mic cables from Dap Audio Priority paging: The amplifier features a transistorized circuit, which automatically mutes the other inputs and allows microphone #1 to talk over for special or emergency announcements.
Page 9
Before switching off the power When you have finished using the CD player, before switching off the power, be sure that the disc holder has been closed with the OPEN/CLOSE button. CAUTION: Do not forcibly close the disc holder when the power is off. CD’s 1.
Page 10
CD function buttons CD power switch with two-position for ON-OFF mode, before press it, please turn off the volume knob. OPEN/CLOSE: press to open/close the disc holder PLAY/PAUSE: when press the button, the CD player will start playing; press the same button again and the CD player will pause.
Connection Cables Take care of the connector cables, always holding them by the connectors and avoiding knots and twists when coiling them: This gives the advantage of increasing their life and reliability, which is always to your advantage. Periodically check that your cables are in good condition, that they are correctly wired and that all their contacts are perfectly efficient: a great number of problems (faulty contacts, ground hum, discharges, etc.) are caused entirely by using unsuitable or faulty cables.
Maintenance Dap Audio MA45CD requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.
Page 15
Problem Cause Solution No lights illuminates when the 1. Is the unit plugged into a live 1. Load outlet POWER button is pressed. outlet? 2. Was the AC fuse opened? 2. Replace AC fuse 3. Was the DC fuse opened? 3.
Product Specifications Model: DAP Audio MA45CD Power consumption: 110W DC Power consumption: 40W Power Supply: AC or DC 12V Power Output: RMS 45W Output terminal block: Low impedance: 4~16Ω High voltage: 50V, 70V, 100V Input sensitivity: Mic 1-3: - 52dB ± 1 dB AUX: - 20dB ±...
Need help?
Do you have a question about the MA45CD and is the answer not in the manual?
Questions and answers