Fujitsu F-02F Instruction Manual page 155

❖
Removing USB mass storage
Do not remove USB mass storage while transferring data.
Doing so may damage the data.
1
From the Home screen,
[Storage]
2
[Unmount USB storage] Remove USB cable
Displaying on a TV via MHL connection
Connect the terminal to a TV with HDMI/MHL connectors to
display videos or images on the TV.
To connect to an MHL-TV, an MHL cable (commercially
available) is required.
To connect a TV equipped with HDMI terminal, the following
cables are required.
- HDMI standard certified HDMI cable (Category 2)
compatible with HDMI plug (Type A) (commercially
available)
- HDMI conversion cable L01 (optional) or HDMI conversion
cable SC01 (optional)
For HDMI conversion cable, connection with microUSB
cable (optional) or AC Adapter 04 (optional) is required. For
details on connection, refer to the HDMI conversion cable
manual.
DOCOMO does not guarantee actual operations for all HDMI
devices.
[Settings]
153
1
Connect an HDMI cable with an HDMI
conversion cable
For details on connection of HDMI conversion cable,
refer to the HDMI conversion cable manual.
2
Connect the HDMI cable to a TV HDMI port
For HDMI connection, switching input, volume control,
etc, refer to the operation manual of the TV.
3
Connect the HDMI conversion cable to the
external connection jack of the terminal
If the HDMI cable is unplugged while displaying on the
TV, the terminal turns to connection stand-by mode for
a certain period of time.
✔INFORMATION
When connecting the TV that does not support HDCP, images
or sounds are not output properly.
When starting MHL output, the TV input mode may not
switch and images may not be displayed depending on the
TV connected. In that case, switch input mode using a TV
remote control etc.
The output data from the terminal may not fit the TV screen
depending on the TV connected. In that case, change the TV
display setting.
While the HDMI cable is connected, do not hold the HDMI
cable to lift the terminal.
Remove the HDMI cable when not displaying on the TV.
Radio wave conditions may be affected depending on your
usage environment when using MHL connection.
External device connection