Screen Lock - Fujitsu F-02F Instruction Manual

Screen lock

Display lock screen to prevent unintended operations, set to
request authentication on the lock screen to prevent others
from misusing the terminal, etc.
❖
Setting security unlock preference
Set type of authentication operation to cancel the screen lock.
1
From the Home screen,
[Security] [Security unlock preference]
2
Authenticate
To set for the first time, authentication is not required.
3
Selecting an item
None : Set not to display the lock screen.
Touch/Swipe : Set to cancel the unlock screen by
touching/swiping.
Pattern : Set to unlock by a pattern connecting at least 4
points.
Security code : Set to unlock by a security code ( 4- to 16-
digit number).
Password : Set to unlock by a password (which consists of
4 to 16 alphanumerics/symbols).
Fingerprint : Set to unlock by fingerprint authentication.
For using fingerprint authentication, confirm the
precautions ( P129) and then register fingerprint.
To set security unlock preference for the first time after
fingerprint is registered, tap [Fingerprint] and
authenticate with fingerprint.
Face recognition : Set to unlock by face recognition. For
other security unlock except screen lock, use the unlock
preference selected for backup lock.
[Settings]
127
✔INFORMATION
To hide the pattern when unlocking, from the Home screen,
[Settings] [Security] Unmark [Make pattern visible].
To hide the characters when entering the password, from the
Home screen, [Settings] [Security] Unmark [Make
passwords visible].
To set to require blinking for face recognition, from the Home
Screen, [Settings] [Security] Mark [Liveness check].
If you use authentication storage, only security code and
password are available for unlock preference.
If you use authentication storage and set unlock preference in
combination with fingerprint, fingerprint authentication may
not be available temporarily after turning the power OFF and
ON. In this case, authenticating with unlock preference in
combination with the fingerprint once makes fingerprint
authentication available.
Settings