Fujitsu F-02F Instruction Manual page 130

❖
Locking/Unlocking screen
Lock
P /Press the fingerprint sensor
1
The terminal goes into sleep mode and the screen is
locked.
Unlock
In sleep mode, press P /the fingerprint
1
sensor On the lock screen,
Depending on the security unlock setting ( P127),
authentication is required on the lock screen.
For fingerprint authentication, if you press the
fingerprint sensor in Step 1, release your finger from the
fingerprint sensor and then slide with the registered
fingerprint to unlock.
When the fingerprint authentication is not available,
you can authenticate by tapping other unlocking
method button.
✔INFORMATION
When a security unlock preference which requires
authentication on the lock screen is selected, from the Home
screen, [Settings] [Security] Mark [Power button
instantly locks] to lock the screen as soon as P /the
fingerprint sensor is pressed. To cancel the screen lock,
authentication is needed.
❖
Setting wallpaper on the lock screen
Set wallpaper for lock screen.
1
From the Home screen,
[Security]
2
[Lock screen wallpaper] Select an item
❖
Displaying owner info on lock screen
1
From the Home screen,
[Security]
2
[Owner info] Enter owner information
If [Show owner info on lock screen] is unmarked, mark
it.
❖
Locking screen automatically
Lock the screen when the set time elapses after the terminal
goes into the sleep mode if a security unlock preference which
requires authentication on the lock screen is selected.
You need to set the security unlock preference in advance.
P127
1
From the Home screen,
[Security]
2
[Automatically lock] Select a time
128
[Settings]
[Settings]
[Settings]
Settings