Fujitsu F-02F Instruction Manual page 33

Charging with desktop holder
Charge the battery using included Desktop Holder F43 and AC
Adapter F07 as follows.
a Insert AC power cable into AC adapter main unit
b Insert the connector of AC adapter main unit into the
charging jack of the desktop holder
c Insert the power plug of AC power cable into a power
outlet
d Align the groove of the terminal with the projection part of
the desktop holder and insert the terminal until it clicks,
then confirm that the indicator LED lights on
Check the direction to connect correctly. Connecting
forcibly may cause damage.
Indicator LED lights in red while charging, and turns off
when charging is complete.
e When charging is complete, remove the terminal from the
desktop holder, then remove the power plug of AC power
cable from the outlet
f Remove the connector of AC adapter main unit from the
desktop holder
Groove
Desktop Holder
Connector
31
To AC 100V
outlet
Indicator LED
Power
plug
AC adapter main
unit
AC power cable
Jack on the
Desktop Holder
Before using the terminal