Download Print this page

Advertisement

System
Operating manual
FUJITSU Tablet STYLISTIC Q616

Advertisement

   Summary of Contents for Fujitsu Q616

  • Page 1

    System Operating manual FUJITSU Tablet STYLISTIC Q616...

  • Page 2

    Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!

  • Page 4

    Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2016. All rights reserved. Publication Date 05/2016 Order No.: A26391-K449-Z320-1-7619, edition 1...

  • Page 5

    FUJITSU Tablet STYLISTIC Q616 Operating manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the Tablet PC Accessories for your Tablet PC (optional) Security functions Connecting external devices Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...

  • Page 6

    Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    ................34 Fujitsu...

  • Page 8

    Discard Changes – Discard changes without exiting the BIOS Setup Utility ....60 Save Changes - save changes without exiting the BIOS Setup Utility ....60 Fujitsu...

  • Page 9

    Index ................. . 83 Fujitsu...

  • Page 10

    Contents Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    Front 1 = Touchscreen 6 = Mechanical fixture for Slice Keyboard/cradle 2 = Camera LED 7 = Docking port 3 = Camera 8 = Windows button 4 = Ambient light sensor 5 = Power-on indicator Fujitsu...

  • Page 14

    2 = Loudspeaker 7 = USB port (USB 2.0) 3 = Shortcut button 8 = USB port (USB 3.0) 4 = Volume down button 9 = Pen slot (optional) 5 = Volume up button 10 = Eyelet for optional pen tether Fujitsu...

  • Page 15

    Ports and controls Rear 1 = SmartCard reader (configuration 5 = NFC (Near Field Communication) dependent) (configuration dependent) 2 = Camera LED 6 = Fingerprint sensor (configuration dependent) 3 = Camera 4 = Camera light Fujitsu...

  • Page 16: Important Notes

    (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch wireless components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...

  • Page 17: Protecting The Display Screen

    You will then be able to work for longer before having to recharge the battery. Power efficiency is increased and environmental pollution reduced. You save money and help protect the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 31"). Fujitsu...

  • Page 18: Travelling With Your Tablet Pc

    ► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► To protect against damaging jolts and bumps, use a Tablet PC carrying case to transport your Tablet PC. Fujitsu...

  • Page 19: Cleaning The Tablet Pc

    Cleaning Notes TabletPC Keyboard Touchpad Touchscreen The casing surfaces may be cleaned with a dry cloth. If particularly dirty, use a damp cloth that has been dipped in water mixed with mild domestic detergent and then carefully wrung out. Fujitsu...

  • Page 20: First-time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 21: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 22: Switching On The Device For The first Time

    ► Press the ON/OFF button (1) for about one second to switch the device on. The power-on indicators (2) light up whenever the system is switched on. ► During installation, follow the instructions on screen. Fujitsu...

  • Page 23

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device. This information can also be found on the Internet at "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 24: Working With The Tablet Pc

    "Connecting external devices", Page Please refer to the notes in "Important notes", Page Status indicators Statusindicators Symbols The status indicators (1, 2, 3) provide information about the condition of the power supply, the rechargeable battery and the wireless components. Fujitsu...

  • Page 25

    The indicator is flashing: The wireless components are switched on and Wake On Wireless LAN is enabled, while the Tablet PC is in sleep mode or in save-to-disk mode, or is switched off. • The indicator is not illuminated: The wireless components are switched off. Fujitsu...

  • Page 26: Switching On The Tablet Pc

    Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...

  • Page 27: Switching The Tablet Pc Off

    "Screen resolutions for integrated screen and external screens", Page High-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear image.

  • Page 28: Select Display Orientation (portrait Or Landscape Orientation)

    In the settings there are profiles saved for operation with different screen orientations. These profiles have preset standard configurations that can be modified as desired. These settings do not just affect the monitor settings on the tablet PC, but also on any external monitors that may be connected. Fujitsu...

  • Page 29: Using fingers

    You can also use the pen as a drawing tool. A pen tether is available as an optional extra, which you can tie to the eyelet on the pen and to the eyelet on the tablet PC. Fujitsu...

  • Page 30

    Opening a context Click with the right-hand mouse Place the pen directly on the required menu button. element and hold the pen pressed against the screen. Moving the cursor - Place the pen tip directly on the screen. Fujitsu...

  • Page 31: Pen Position

    You should also always repeat the calibration if the co-ordination between the pen and cursor movement deteriorates. Operating system Menu Windows 10 To calibrate, call up the Hardware and Sound / Tablet PC Settings function in the Control Panel. You need to calibrate both portrait and landscape formats. Fujitsu...

  • Page 32: Securing The Pen Tether (optional)

    Securing the pen tether (optional) You can attach the pen with an optional pen tether to prevent accidentally dropping it or losing it. ► Secure one end of the pen tether to the pen and the other end to the Tablet PC. Fujitsu...

  • Page 33: Tablet Buttons

    Volume down button Decrease the volume Volume up button Increase the volume If the Windows button of the tablet PC is pressed in combination with the ON/OFF button (4), this corresponds to the key combination Ctrl on a keyboard. Fujitsu...

  • Page 34: Camera

    five minutes of the warning alarm described above, your Tablet PC will switch off automatically. monitoring the battery charging level Battery Batterystatusmeter In the system bar / status display there is a battery symbol shown for monitoring the battery capacity. The battery symbol shows you the battery charge. Fujitsu...

  • Page 35: Using The Power-management Features

    ► Select the power management functions in your Control Panel. The recommended settings for the Windows energy saving functions are predefined as "Fujitsu EcoSettings" in the Power Options of the Control Panel and can be displayed there.

  • Page 36: Inserting The Memory Card

    ► Press the edge of the memory card so that the memory card jumps (2) slightly out of the slot (a). ► Pull the memory card out of the slot (a) in the direction of the arrow (3). ► Close the slot cover. Fujitsu...

  • Page 37: Sim Card

    ► Pull the SIM card holder out of the slot (2). ► Insert the SIM card (3) in the SIM card holder as shown. ► Push the SIM card holder back into the slot (4). ► Close the slot cover. Fujitsu...

  • Page 38: Removing The Sim Card

    ► Close the slot cover. Wireless LAN / Bluetooth / UMTS / LTE / NFC wireless components (depending on configuration) The installation of wireless components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off wireless components are switched on and off via the corresponding functions of the operating system.

  • Page 39: Access Via Umts / Lte

    If you did not order a UMTS / LTE module, you can purchase the accessories for UMTS / LTE reception from your retailer or your Fujitsu Technology Solutions dealer. You will find information on establishing the connection with the UMTS / LTE network in the documentation for the hardware used.

  • Page 40: Accessories For Your Tablet Pc (optional)

    Cradle for charging the tablet PC and with additional ports • Slice Keyboard • The VESA mount, wrist strap and shoulder strap are available as a special cover kit • Cover The following sections provide more information on handling the accessories. Fujitsu...

  • Page 41: Your Cradle (optional)

    Tablet PC 9 = DisplayPort 3 = USB port 3.0 10 = LAN port 4 = USB port 3.0 11 = Security Lock device 5 = USB port 3.0 12 = DC input connector (DC IN) 6 = Microphone port Fujitsu...

  • Page 42: Setting Up The Cradle

    ► Remove the power plug of the mains adapter from the mains socket. ► Pull the mains adapter cable out of the DC jack (DC IN) of the Tablet PC. Fujitsu...

  • Page 43

    ► Plug the DC output connector on the mains adapter into the DC input connector (DC IN) on the cradle (2). ► Connect the power cable to the mains adapter (3). ► Plug the power cable into the mains socket (4). Fujitsu...

  • Page 44: Disconnecting The Tablet Pc From The Cradle

    ► Push the release button in the direction of the arrow (1) until it remains in the pressed position (red marking becomes visible). ► Lift the Tablet PC from the cradle in the direction of the arrow (2), while supporting the underneath of the cradle. Fujitsu...

  • Page 45: Slice Keyboard (optional)

    4 = Caps Lock indicator (switch upper case writing function on and off) 2 = Docking port for the Tablet PC 5 = Scroll indicator (Scroll Lock, function 3 = Num Lock indicator (switch virtual depends on application program) keypad on and off) Fujitsu...

  • Page 46: Connecting The Tablet Pc To The Slice Keyboard

    ► Connect the mains adapter cable to the DC input connector (DC IN) on the Tablet PC (2). ► Connect the power cable to the mains adapter (3). ► Plug the power cable into the mains socket (4). Fujitsu...

  • Page 47: Separating The Tablet Pc From The Slice Keyboard

    PC using the appropriate function in the operating system. ► Press and hold the release button (1) until it remains in the pressed position (red marking becomes visible). ► Lift the Tablet PC away from the Slice Keyboard in the direction of the arrow (2). Fujitsu...

  • Page 48: Cover (optional)

    If you are using the cover, never connect the Tablet PC to the Slice Keyboard. ► Place the Tablet PC on the cover as shown. The following illustration shows you the many ways in which the cover can be used: Fujitsu...

  • Page 49: Security Functions

    The fingerprint sensor can record an image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). Fujitsu...

  • Page 50: Using The Security Lock

    Your password can be up to 32 characters long and can contain letters, numbers and special characters. A distinction is made between upper and lower case. When using special characters, please remember that they depend on the country version of the keyboard being used. Fujitsu...

  • Page 51: Protecting Bios Setup Utility (supervisor And User Password)

    You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password. Password Supervisorpassword User password ► Call the BIOS Setup Utility and go to the Security menu. ► When changing the password, proceed exactly as for password assignment. Fujitsu...

  • Page 52: Password Protection For Booting Of The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The Tablet PC reboots. The system is no longer password-protected. Fujitsu...

  • Page 53: Password Protection For The Hard Disk

    ► After providing the input, press the Enter key three times. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The Tablet PC reboots and there is no longer any password protection for this hard disk. Fujitsu...

  • Page 54: Smartcard Reader (depending On Configuration)

    SmartCard with you. In order to be able to take advantage of all the security features of your Tablet PC, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 55: Inserting The Smartcard

    Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader. ► Push the SmartCard into the SmartCard reader (1) with the chip towards the rear of the Tablet PC. Fujitsu...

  • Page 56: Trusted Platform Module - Tpm (depending On Configuration)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The tablet PC is rebooted and the TPM is disabled. Fujitsu...

  • Page 57: Enable Password Entry Using The On-screen Keyboard

    ► In the Exit menu, choose the option Exit Saving Changes. ► Press the enter key and select Yes. The tablet PC is rebooted and the password dialogue is displayed. Tap on the password field to enable the on-screen keyboard. Fujitsu...

  • Page 58: Connecting External Devices

    Dolby Digital or DTS. To play back HDMI sound, you must change the HDMI sound settings accordingly. You can find the settings under Control Panel - Hardware and Sound. Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound. Fujitsu...

  • Page 59: Displayport (cradle Only)

    You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touch screen", Page You can display the same picture on the external monitor and the LCD screen of the Tablet PC simultaneously. Fujitsu...

  • Page 60: Connecting Usb Devices

    ► Tap the symbol for safe removal of the hardware. ► Select the device which you want to shut down and remove. ► Tap OK. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 61: Connecting External Audio Devices

    MP3 player, CD player or a tape deck to your tablet PC. ► Connect the audio cable to the external device. ► Connect the audio cable to the combined headphone and microphone port of the tablet PC or to the microphone port of the cradle (optional). Fujitsu...

  • Page 62: Settings In Bios Setup Utility

    ► Press and hold the volume down button and switch the tablet PC on. BIOSSetupUtility ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...

  • Page 63: Operating Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 64: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 65: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 66: Executing A Reset

    ► For further clarification of the problem, contact the Service Desk for your country ("http://support.ts.fujitsu.com/contact/servicedesk"). When you do this, please have ready the ID number and serial number of your system.

  • Page 67: Battery Charging Indicator Not Lit

    "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PC’s touchscreen is difficult to read. Touchscreen Touchscreen Cause Troubleshooting Reflected glare ► Move the Tablet PC into a different position. ► Increase the brightness of the screen. Fujitsu...

  • Page 68: The External Monitor Remains Blank

    The cursor does not correctly follow the pen movements Fault elimination Cause Pen incorrectly calibrated ► Calibrate the pen as described in chapters "Setting the pen", Page 27 "Calibrating the pen", Page Fujitsu...

  • Page 69: Pen Input Not Working

    ► Close the application program or restart malfunction. the Tablet PC (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Connect the mains adapter to the Tablet Fujitsu...

  • Page 70: The Printer Does Not Print

    The maximum brightness may have been set ► Reduce the brightness of the screen to for the screen. lower energy consumption: You will find the setting under Control Panel – Hardware and Sounds – Windows Mobility Center. Fujitsu...

  • Page 71: Smartcard Reader Is Not Recognised

    Desk will refer you to our service partner, who will unlock your device (for a charge). SmartCard lost Cause Troubleshooting SmartCard lost ► If you work in a network, contact your system administrator, who can boot your Tablet PC with a Supervisor SmartCard. Fujitsu...

  • Page 72: Acoustic Warnings

    This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre. Fujitsu...

  • Page 73

    System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...

  • Page 74: Restoring The System Under Windows 10

    ► Beginning at the right edge of the Windows Start screen or the desktop, use a finger to sweep over the screen to open the Action Centre. ► Select All settings. ► Select Update & security. ► Select Recovery. ► Select according to your requirements from the options given. Fujitsu...

  • Page 75: Technical Data

    Tablet buttons 4 keys Pen with one push-button Pen (optional) Slots Memory card slot 1 x microSD SIM card slot 1 x Micro-SIM SmartCard reader (configuration dependent) Ports Combined headphone and microphone port 3.5 mm stereo mini jack Docking port Fujitsu...

  • Page 76: Screen Resolutions For Integrated Screen And External Screens

    @60Hz 1920x1080 3840x2160 @60Hz @30Hz 1920x1080 1920x1200 @60Hz @60Hz 1920x1080 4096x2160 @60Hz @24Hz 1920x1080 3840x2160 3840x2160 with cradle @60Hz @30Hz @30Hz 1920x1080 1920x1200 1920x1080 @60Hz @60Hz @60Hz 1920x1080 @60Hz 1920x1080 @60Hz 1920x1080 @60Hz 1920x1080 1920x1080 1920x1080 @60Hz @60Hz @60Hz Fujitsu...

  • Page 77: Rechargeable Battery

    Technical data Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". 3-cell lithium polymer rechargeable battery 3450 Rated voltage 11.1 V Rated capacity 38 Wh 65 W mains adapter for the tablet PC...

  • Page 78: Slice Keyboard (optional)

    Environmental conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature 5 °C ..35 °C / 41 °F ..95 °F Temperature during transportation –15 °C ..60 °C / 5 °F ..140 °F Fujitsu...

  • Page 79: Manufacturer's Notes

    The "Declarations of Conformity" for the device can be found on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates/default.aspx". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Electrical safety including ergonomic requirements...

  • Page 80: Ce Marking

    CE nnnn (!) ; nnnn: For digits and exclamation mark (!), see label on the product. The product complies with the legal limits for SAR in the EU. You can find more information and declarations of conformity on the Internet at: "http://globalsp.ts.fujitsu.com/sites/certificates". This equipment can be used in the following countries: Belgium...

  • Page 81: Radio Frequencies Used

    Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.

  • Page 82

    Places where telephones are specifically installed to alert emergency authorities such as fire, police or medical assistance personnel. • Hospital rooms, residential health care facilities, convalescent homes and prisons. • Hotel, motel or apartment lobbies. • Stores where telephones are used by patrons to order merchandise. Fujitsu...

  • Page 83: Doc (industry Canada) Notices

    Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.

  • Page 84

    Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.

  • Page 85: Fcc Regulatory Information For Tablet Pcs With Radio Device

    In cases in which the policy regarding use of radio devices in specific environments is not clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain authorization to use these devices prior to operating the equipment. Fujitsu...

  • Page 86

    (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu...

  • Page 87: Index

    Landscape orientation Declaration of conformity 75 screen 24 Device Life, battery 30 setting up 17 Low voltage directive 76 Display orientation selecting 24 DisplayPort 55 DOC (INDUSTRY CANADA) NOTICES 79 Mains adapter connecting 17 setting up 17 Electromagnetic compatibility 76 Fujitsu...

  • Page 88

    Power cleaning 15 power consumption 31 transporting 14 power-management features 31 using 20 Power-on indicator 22 Tablet PC, operation 20 Preparing for operation 17 Tablet PC: switching on 22 Printer does not print 66 Technical data Mains adapter 73 Fujitsu...

  • Page 89

    63 VGA connection socket 55 notes 23 reflected glare 63 remains blank 63 Wireless component: touchscreen is too dark 63 safety notes 12 TPM 52 Wireless LAN: Transport safety notes 12 Transport damage 16 Transportation 14 Travel 14 Fujitsu...

Comments to this Manuals

Symbols: 0
Latest comments: