Fujitsu STYLISTIC V727 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Tablet
  5. STYLISTIC V727
  6. Operating manual

Fujitsu STYLISTIC V727 Operating Manual

Hide thumbs Also See for STYLISTIC V727:
Table of Contents

Advertisement

Quick Links

Download this manual
System
Operating manual
FUJITSU Tablet STYLISTIC V727

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu STYLISTIC V727

Summary of Contents for Fujitsu STYLISTIC V727

  • Page 1 System Operating manual FUJITSU Tablet STYLISTIC V727...
  • Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2018. All rights reserved. Publication Date 06/2018 Order No.: A26391-K480-Z320-1-7619, edition 1...
  • Page 5 FUJITSU Tablet STYLISTIC V727 Operating manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the Tablet PC Accessories for your Tablet PC (optional) Security functions Connecting external devices Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    SIM card (configuration dependent) ............35 Fujitsu...
  • Page 8 Load Setup Defaults – Copy Standard Entries ......... 66 Fujitsu...
  • Page 9 Index ................. . 81 Fujitsu...
  • Page 10 Contents Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    2 = Touchscreen 8 = Mechanical fixture for cradle 9 = Mechanical fixture for magnetic keyboard 3 = Camera LED 4 = Ambient light sensor 10 = Docking port 5 = Microphone 11 = Alignment marking 6 = Camera Fujitsu...
  • Page 14 5 = ON/OFF button (configuration-dependent) 6 = USB 3.1 Gen1 port with charging 2 = Shortcut button function (USB Type-C) 3 = Volume down button 7 = USB port 3.0 (USB Type-A) 4 = Volume up button 8 = Pen slot Fujitsu...
  • Page 15 5 = Camera light (configuration-dependent) 6 = Battery release slider 2 = Eyelet for pen tether (top of device) 7 = Battery compartment with SIM card 3 = Camera LED slot under the battery (SIM card slot configuration-dependent) 4 = Camera Fujitsu...

  • Page 16: Important Notes

    (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch wireless components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu...

  • Page 17: Caution: Device Contains Magnets

    You will then be able to work for longer before having to recharge the battery. Power efficiency is increased and environmental pollution reduced. You save money and help protect the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 33"). Fujitsu...

  • Page 18: Travelling With Your Tablet Pc

    ► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► To protect against damaging jolts and bumps, use a Tablet PC carrying case to transport your Tablet PC. Fujitsu...

  • Page 19: Cleaning The Tablet Pc

    "Removing and installing the battery", Page 31). The casing surfaces may be cleaned with a dry cloth. If particularly dirty, use a damp cloth that has been dipped in water mixed with mild domestic detergent and then carefully wrung out. Fujitsu...

  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 21: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 22: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device. This information can also be found on the Internet at "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 23: Working With The Tablet Pc

    "Connecting external devices", Page Please refer to the notes in "Important notes", Page Status indicators Statusindicators Symbols The status indicators (1, 2, 3) provide information about the condition of the power supply, the rechargeable battery and the wireless components. Fujitsu...
  • Page 24 The indicator is flashing: The wireless components are switched on and Wake On Wireless LAN is enabled, while the Tablet PC is in sleep mode or in save-to-disk mode, or is switched off. • The indicator is not illuminated: The wireless components are switched off. Fujitsu...

  • Page 25: Switching On The Tablet Pc

    Control Panel - Hardware and Sound - Power Options If you have assigned a password, you must enter this when requested to do so, in order to start the operating system. Detailed information can be found in the chapter "Security functions", Page Fujitsu...

  • Page 26: Switching The Tablet Pc Off

    "Screen resolutions for integrated screen and external screens", Page High-quality LCD screens (TFT) are installed in Fujitsu Tablet PCs. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear image.

  • Page 27: Select Display Orientation (Portrait Or Landscape Orientation)

    These settings do not just affect the monitor settings on the tablet PC, but also on any external monitors that may be connected. You can change these settings under Control Panel - Hardware and Sound - Windows Mobility Center / Rotate screen. Fujitsu...

  • Page 28: Using Fingers

    You can also use the pen as a drawing tool. A pen tether is available as an optional extra and you can use this to tie the eyelet on the pen to the eyelet on the Tablet PC. Fujitsu...
  • Page 29 Opening a context Click with the right-hand mouse Place the pen directly on the required menu button. element and hold the pen pressed against the screen. Moving the cursor - Place the pen tip directly on the screen. Fujitsu...

  • Page 30: Pen Position

    A charging time of approximately 15 seconds is sufficient to enable to pen to be used for 90 minutes again. ► Insert the pen fully in the slot. After a charging period of approximately 5 minutes, the pen battery is fully charged. Fujitsu...

  • Page 31: Setting The Pen

    Securing the pen tether (optional) You can attach the pen with an optional pen tether to prevent accidentally dropping it or losing it. ► Secure one end of the pen tether to the pen and the other end to the Tablet PC. Fujitsu...

  • Page 32: Tablet Buttons

    Decrease the volume Shortcut button Start function manager or screen shot function If the ON/OFF switch of the Tablet PC is pressed in combination with the volume-down button, this corresponds to the function of the key combination Ctrl on a keyboard. Fujitsu...

  • Page 33: Camera

    The camera automatically adjusts itself to the current light level. For this reason the touchscreen may flicker while the light level is adjusted. Further information on use of the camera and additional settings can be found in the Help function of the program which uses the camera. Fujitsu...

  • Page 34: Rechargeable Battery

    To be able to make use of the optimum charge capacity of the battery, it should be completely discharged and then fully recharged. If you do not use the batteries for long periods, remove them from the Tablet PC. Do not store batteries in the device! Fujitsu...

  • Page 35: Removing And Installing The Battery

    Working with the Tablet PC Removing and installing the battery Only use batteries approved by Fujitsu for your tablet PC. Never use force when fitting or removing a battery. Make sure that no foreign bodies get into the battery connections.
  • Page 36 ► Slide the battery release in the direction of the arrow (2). The battery is now secured in place. ► Turn the Tablet PC the correct way around again and place it on a flat surface. ► Reconnect the cables that were previously disconnected. Fujitsu...

  • Page 37: Using The Power-Management Features

    Your Tablet PC is equipped with an integrated memory card reader. You can use memory cards to increase the storage of your Tablet PC. Observe the manufacturer’s instructions when handling the memory cards. Memory card Supported formats It supports the following formats: • Micro Secure Digital (microSD Card) • microSDHC • microSDXC Fujitsu...

  • Page 38: Inserting The Memory Card

    (see the documentation for your operating system). ► Press the edge of the memory card so that the memory card jumps (1) slightly out of the slot (a). ► Pull the memory card out of the slot (a) in the direction of the arrow (2). Fujitsu...

  • Page 39: Sim Card (Configuration Dependent)

    ► Insert the SIM card (2) into the SIM card holder as shown in the diagram on the SIM card holder. ► Slide the SIM card holder with the SIM card into its slot (3). ► Install the battery again, see "Installing the battery", Page Fujitsu...

  • Page 40: Removing The Sim Card

    ► Pull the SIM card holder out of the slot (1). ► Remove the SIM card from the SIM card holder (2). ► Slide the SIM card holder back into its slot (3). ► Install the battery again, see "Installing the battery", Page Fujitsu...

  • Page 41: Wireless Lan / Bluetooth / Lte Radio Components (Configuration Dependent)

    Working with the Tablet PC Wireless LAN / Bluetooth / LTE radio components (configuration dependent) The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off wireless components are switched on and off via the corresponding functions of the operating system.

  • Page 42: Ethernet And Lan (Optional, Only With Cradle Or Adapter Cable)

    The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Use a shielded network cable (CAT 5e). Whether your device has this function or not depends on the device configuration chosen. Fujitsu...

  • Page 43: Accessories For Your Tablet Pc (Optional)

    Cradle for charging the Tablet PC and with additional ports • Magnetic keyboard • Flip-cover stand • USB - LAN adapter cable • Adapter cable USB Type-C - HDMI The following sections provide more information on handling the accessories. Fujitsu...

  • Page 44: Your Cradle (Optional)

    Place the cradle on a flat, stable, nonslippery surface. • Never place the cradle and the mains adapter on a heat-sensitive surface. • Do not expose the cradle to extreme environmental conditions. • Protect the cradle from dust, humidity and heat. Fujitsu...

  • Page 45: Connecting The Tablet Pc To The Cradle

    ► Plug the DC output connector on the mains adapter into the DC input connector (DC IN) on the cradle (2). ► Connect the power cable to the mains adapter (3). ► Plug the power cable into the mains socket (4). Fujitsu...

  • Page 46: Disconnecting The Tablet Pc From The Cradle

    ► Push the release button in the direction of the arrow (1) until it remains in the pressed position (red marking becomes visible). ► While holding the bottom part of the cradle, lift the Tablet PC away from the cradle in the direction of the arrow (2). Fujitsu...

  • Page 47: Magnetic Keyboard (Optional)

    3 = Num Lock indicator (switch virtual keypad on and off) A microfibre cloth is provided with your magnetic keyboard. To protect your Tablet PC’s touchscreen, we recommend placing the microfibre cloth between the keyboard and the touchscreen when the device is folded closed. Fujitsu...

  • Page 48: Connecting The Tablet Pc To The Magnetic Keyboard

    (1) and the magnetic connection clicks into place. ► Connect the mains adapter cable to the DC input connector (DC IN) on the Tablet PC (2). ► Connect the mains cable to the mains adapter (3). ► Plug the mains cable into the mains socket (4). Fujitsu...

  • Page 49: Disconnecting The Tablet Pc From The Magnetic Keyboard

    When it is folded over, the flip-cover stand serves as a protective cover for the Tablet PC and magnetic keyboard. The flip-cover stand contains magnets. Please take into account the safety information in chapter "Important notes", Page 12, section "Caution: Device contains magnets", Page Fujitsu...

  • Page 50: Insert The Tablet Pc Into The Flip-Cover Stand

    ► Remove the mains adapter, the magnetic keyboard and all other connected devices. ► When necessary, clean the back of the Tablet PC to remove dust and dirt. ► Remove the film from the adhesive surface of the flip-cover stand (1). Fujitsu...
  • Page 51 ► Place the Tablet PC down on the flip-cover stand (3). ► Carefully lift the Tablet PC and flip-cover stand and check that they are firmly connected together. When required, the Tablet PC and flip-cover stand can be connected to the magnetic keyboard (optional). Fujitsu...
  • Page 52 Accessories for your Tablet PC (optional) The following illustration shows you the many ways in which the cover can be used: Fujitsu...

  • Page 53: Connect The Tablet Pc With Flip-Cover Stand To The Magnetic Keyboard

    ► Move the Tablet PC into the upright position with the aid of the flip-cover stand (1). ► Position the Tablet PC so that the docking ports of the Tablet PC and the magnetic keyboard approach in the direction of the arrow (2) and the magnetic connection clicks into place. Fujitsu...

  • Page 54: Security Functions

    If you forget your passwords you will need to contact the our Service Desk. Deletion or resetting of passwords is not covered by your warranty and a charge will be made for assistance. Fujitsu...

  • Page 55: Setting Up The Fingerprint Sensor (Configuration Dependent)

    ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). The current Workplace Protect software for the fingerprint sensor can be found on the Internet at "http://www.fujitsu.com/fts/solutions/business-technology/security/secure/index.html." Using the security lock (cradle only) SecurityLock...

  • Page 56: Configuring Password Protection In Bios Setup Utility

    The Tablet PC is rebooted and the new password is effective. It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility. Please note that the user password only provides access to a few of the BIOS settings. Fujitsu...

  • Page 57: Password Protection For Booting Of The Operating System

    ► Select the Disabled option and press the Enter key. If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit. The Tablet PC reboots. The system is no longer password-protected. Fujitsu...

  • Page 58: Password Protection For The Hard Disk

    ► After providing the input, press the Enter key three times. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The Tablet PC reboots and there is no longer any password protection for this hard disk. Fujitsu...

  • Page 59: Smartcard Reader (Depending On Configuration)

    SmartCard with you. In order to be able to take advantage of all the security features of your Tablet PC, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 60: Inserting The Smartcard

    Do not use force when inserting and removing the SmartCard. Make sure that foreign objects do not fall into the SmartCard reader. ► Push the SmartCard into the SmartCard reader (1) with the chip towards the front of the Tablet PC. Fujitsu...

  • Page 61: Trusted Platform Module - Tpm (Depending On Configuration)

    ► Mark the TPM Security Chip Setting field and press the Enter key. ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. The tablet PC is rebooted and the TPM is disabled. Fujitsu...

  • Page 62: Enable Password Entry Using The On-Screen Keyboard

    ► In the Exit menu, choose the option Exit Saving Changes. ► Press the enter key and select Yes. The tablet PC is rebooted and the password dialogue is displayed. Tap on the password field to enable the on-screen keyboard. Fujitsu...

  • Page 63: Connecting External Devices

    Dolby Digital or DTS. In order to reproduce the sound, you must go into Windows and adjust the sound settings. ► To do this, deactivate the DTS Audio and Dolby Digital settings in the control panel for the Realtek HDMI Output. Fujitsu...

  • Page 64: Vga Monitor Port (Cradle Only)

    You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC, see "Touch screen", Page You can display the same picture on the external monitor and the LCD screen of the Tablet PC simultaneously. Fujitsu...

  • Page 65: Connecting Usb Devices

    ► Connect the data cable to the USB port on the Tablet PC. ► Connect the data cable to a USB port of the cradle. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 66: Usb Port With Charging Function (Usb Type-C)

    ► Tap the symbol for safe removal of the hardware. ► Select the device which you want to shut down and remove. ► Tap OK. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 67: Headphones/Microphone/Line-In/Line-Out/Headset Combination Port

    If you purchase a cable from a retailer, please note the following information: The headphones/microphone/Line-In/Line-Out/headset-combi port on your Tablet PC is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu...

  • Page 68: Settings In Bios Setup Utility

    ► Press and hold the volume down button and switch the tablet PC on. BIOSSetupUtility ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...

  • Page 69: Operating Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu...

  • Page 70: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 71: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 72: The Tablet Pc's Date Or Time Is Incorrect

    "Intel Graphics Media Accelerator Driver for mobile". The display on the Tablet PC’s touchscreen is difficult to read. Touchscreen Touchscreen Cause Troubleshooting Reflected glare ► Move the Tablet PC into a different position. ► Increase the brightness of the screen. Fujitsu...

  • Page 73: The External Monitor Remains Blank

    The cursor does not correctly follow the pen movements Cause Fault elimination Pen incorrectly calibrated ► Calibrate the pen as described in chapters "Setting the pen", Page 27 "Calibrating the pen", Page Fujitsu...

  • Page 74: Pen Input Not Working

    Tablet PC (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the Tablet Fujitsu...

  • Page 75: The Printer Does Not Print

    The maximum brightness may have been set ► Reduce the brightness of the screen to for the screen. lower energy consumption: You will find the setting under Control Panel – Hardware and Sounds – Windows Mobility Center. Fujitsu...

  • Page 76: Smartcard Reader Is Not Recognised

    ► If you work in a network, contact your system administrator, who can boot your Tablet PC with a Supervisor SmartCard. Acoustic warnings Acoustic error messages Errors Cause Troubleshooting A beep sounds every few seconds. ► Charge the battery. The battery is almost flat. Fujitsu...

  • Page 77: Error Messages On The Screen

    This section describes the error messages generated by the BIOS Setup. Error messages displayed by the operating system or programmes are described in the relevant documentation. If the error message appears repeatedly, despite troubleshooting measures, please contact the place of purchase or our customer service centre. Fujitsu...
  • Page 78 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...

  • Page 79: Restoring The System Under Windows 10

    ► Beginning at the right edge of the Windows Start screen or the desktop, use a finger to sweep over the screen to open the Action Centre. ► Select All settings. ► Select Update & security. ► Select Recovery. ► Select according to your requirements from the options given. Fujitsu...

  • Page 80: Technical Data

    Combined headphone and microphone port Docking port USB (Universal Serial Bus) 1 x USB 2.0 (Type-A), 1 x USB 3.0 (Type-A), 1 x USB 3.1 with charging function (USB-Type-C) Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Fujitsu...

  • Page 81: Screen Resolutions For Integrated Screen And External Screens

    @60Hz* 3840x2160 1920x1200 @60Hz @60Hz* 3840x2160 1920x1200 @60Hz @60Hz* with cradle 1920x1280 3840x2160 1920x1200 @60Hz @60Hz @60Hz* 1920x1280 3840x2160 1920x1200 @60Hz @60Hz @60Hz* 1920x1280 1024x768 1024x768 @60Hz @60Hz @60Hz 3840x2160 1024x768 1024x768 @60Hz @60Hz @60Hz * with reduced blanking Fujitsu...

  • Page 82: Rechargeable Battery

    Technical data Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". 6-cell lithium-ion rechargeable battery 3140 mAh Rated voltage 11.25 V Rated capacity 35 Wh Mains adapter (65 W) for the Tablet PC with/without...

  • Page 83: Cradle (Optional)

    Environmental conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature 5 °C ..35 °C / 41 °F ..95 °F Temperature during transportation –15 °C ..60 °C / 5 °F ..140 °F Fujitsu...

  • Page 84: Manufacturer's Notes

    Disposal and recycling Notes You can find information on this subject on your Tablet PC or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Electrical safety including ergonomic requirements (GS, depending on the device) Please refer to the associated data sheet to establish whether the model variant of your device has GS certification.

  • Page 85: Index

    Magnetic keyboard setting up 17 Connecting Tablet PC 44 Display orientation ports 43 selecting 23 Mains adapter Display port 59 connecting 17 setting up 17 Memory card handling 33 Energy inserting 34 energy saving 13 removing 34 Energy saving 13 Fujitsu...
  • Page 86 Printer does not print 71 doesn’t work. 70 The wireless connection to a network does not work 71 Time not correct 68 Rechargeable battery 30 Time, daylight savings 68 see Battery 30 Tips 67 Touchpad cleaning 15 Safety notes 12 Fujitsu...
  • Page 87 68 TPM 57 VGA connection socket 60 Transport Transport damage 16 Transportation 14 Travel 14 Wireless component: Troubleshooting 67 safety notes 12 Trusted Platform Module 57 Wireless LAN: safety notes 12 USB connection with charging function (USB Type-C™) 62 Fujitsu...

Table of Contents