Pin Code - Fujitsu F-02F Instruction Manual

The PUK code is written on a subscription form (copy
for user) handed at subscription in a docomo Shop. For
users subscribed in other than docomo Shop, bring a
document (a drivers license etc.) to identify your
subscription and the docomo mini UIM card to a
docomo Shop, or contact "General Inquiries" on the last
page of this manual.
❖
Network security code
The network security code is a 4-digit number necessary for
identification or using the docomo Network Services at
reception of your request in docomo Shop or at a docomo
Shop, docomo Information Center or "
(Customer support)". It can be set any number at the
subscription and also changed later by yourself.
You can change your network security code to the new one
using the PC if you have the "docomo ID/Password" for the "My
docomo" General support site for PC. If you use dmenu,
dmenu "
change them yourself from "
application/Procedures)" (in Japanese only).
* For "My docomo", "
(for the "Instruction Manual" application, "
(Use mobile phone with your manners!)" in "
(Appendix)").
(Customer support)" You can
(Various
(Customer support)", see P194
❖

PIN code

Security code called PIN code can be set for the docomo mini
UIM card. The code is set to "0000" at subscription, you can
change PIN code yourself. P126
PIN is a 4- to 8-digit number (code) that must be entered each
time you insert the docomo mini UIM card into the terminal or
when the terminal is powered ON for user confirmation to
prevent unauthorized use of the docomo mini UIM card by a
third party. Entering the PIN code enables terminal operation.
For using the docomo mini UIM card that you have used on
another terminal by inserting to this terminal, use the set PIN
code on the former terminal. If you did not change the
setting, the code is "0000".
If you enter a wrong PIN code 3 times consecutively, the PIN
code is locked and cannot be used anymore. In this case,
unlock with "PUK". Unlock the PIN code before setting new
PIN code.
When docomo mini UIM card is locked by PIN or PUK,
remove the docomo mini UIM card. The Home screen will
appear and you can perform communication using Wi-Fi
function.
125
Settings