Turning Power On/Off; Basic Operation - Fujitsu F-02F Instruction Manual

Turning power on/off

Turning power on
Press and hold P (2 sec. or more) until the
1
indicator LED lights in green
The terminal vibrates and the lock screen appears
following the startup screen.
2
On the lock screen,
Lock screen P44
Depending on the security unlock setting ( P127),
authentication is required on the lock screen.
For the first activation, make initial settings. P40
Turning power off
Press and hold P until Tablet options
1
appears
2
[Power off] [OK]
The terminal turns off vibrating.
Press and hold P for 8 seconds or more to shut down
the power forcibly.

Basic operation

Using touch panel
Touch the touch panel directly to operate the terminal.
Set whether to vibrate when tapping is recognized (Distinct
touch P115).
❖
Notes for using the touch panel
The touch panel is designed for being touched lightly with
fingers. Do not push it forcibly with a finger or press it with
sharp objects (nail, ballpoint pen, pin, etc.).
Touching the touch panel may not work in the following
cases. Note that it may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with the touch panel wet
- Operation with the finger wet by perspiration or water
- Operation under water
33
Before using the terminal