Installing A Pci Express Card - Dell Dimension 9200C Service Manual

Removing and Installing Parts: Dell Dimension 9200C Service Manual
1 PCI Express x16 card
4 PCI Express x16 card slot
If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not
replacing a card, see Removing a PCI Express
If you are replacing a card, remove the current driver for the card from the operating system.

Installing a PCI Express Card

1. Follow the procedures in
2. Gently push the release tab on the card retention door from the inside to pivot the door open. Because the door is
attached, it will remain in the open position.
1 retention arm tab
4 card connector
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
2 PCI Express x1 card
Card.
Before You Begin.
2 PCI Express card
5 securing tab
3 PCI Express x1 card slot
3 edge connector
6 securing slot