Table of Contents
Advertisement
Removing and Installing Parts: Dell Dimension 9200C Service Manual
1
memory connector closest to processor
3. Align the notch on the bottom of the module with the crossbar in the connector.
1
notch
4
cutouts (2)
NOTICE:
To avoid damage to the memory module, press the module straight down into the connector while you apply
equal force to each end of the module.
4. Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
5. Replace the computer cover (see
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
2
2
crossbar
Replacing the Computer
securing clips (2)
3
3
memory module
Cover).
connector
Advertisement
Table of Contents
