Table of Contents
Advertisement
System Setup: Dell Dimension 9200C Service Manual
Options List — This field appears on the left side of the system setup
window. The field is a scrollable list containing features that define the
configuration of your computer, including installed hardware, power
conservation, and security features.
Scroll up and down the list with the up- and down-arrow keys. As an option
is highlighted, the Option Field displays more information about that
option and the option's current and available settings.
Press <Enter> to expand or contract each of the main option fields.
System Setup Options
NOTE:
Depending on your computer, BIOS version, and installed devices, the items listed in this section may not
appear, or may not appear exactly as listed.
System
Lists system information such as the computer name, the BIOS version number and date, system tags, and
System
Info
other system-specific information.
NOTE:
The system name listed in the BIOS may not appear exactly as the name that appears on the computer
or in the computer's documentation.
Identifies whether the computer's processor supports Hyper-Threading and lists the processor bus speed,
CPU Info
processor ID, clock speed, and L2 cache.
Indicates the amount of installed memory, memory speed, channel mode (dual or single), and type of memory.
Memory
Info
Date/Time Displays current date and time settings.
The computer attempts to boot from the sequence of devices specified in this list.
Boot
Sequence
NOTE:
If you insert a boot device and restart the computer, the device appears in the system setup menu. To
boot from a USB memory device, select the USB device and move it so that it becomes the first device in the
list.
Drives
Enables or disables floppy drives, and sets the read permission for the internal floppy drive.
Diskette
Drive
Off — Disables all floppy drives.
(Internal
USB — Enables the USB floppy drive.
default)
Internal — Enables the internal floppy drive.
Read Only — Enables the internal drive controller and allows the internal floppy drive read-only
permission.
NOTE:
Enables or disables a SATA device (such as a hard drive). On (the default setting) enables the interface so
Drive 0
that the device can be used.
(On
file:///T|/htdocs/systems/dim9200C/en/SM_EN/syssetup.htm[10/31/2012 8:07:30 AM]
Operating systems with USB support will recognize USB floppy drives regardless of this setting.
highlight an option. Press <Enter> to make
that selection active.
Key Functions — This field appears below
the Option Field and lists keys and their
functions within the active system setup field.
Advertisement
Table of Contents
